"OSSDs (Output Signal Switching Devices)","Auxiliary contacts ","One auxiliary contact per channel.","Inputs","One start input per channel and one feedback loop per channel. Freely usable on SFM-B...","Logic functions ","Programmable with AsiMon software. All safety components can be programmed with different functions as inputs. The inputs can be linked with AND or OR gates.","With the monitors SFM-B..., additional logic func- tions such as FlipFlop, switch-on delay, turn-off delay or pulses are available. The number of links and the memory depth are larger than on the SFM-A... devices."

"Gateway to Profibus","For connection to a Profibus DP as a slave and as a master for one or two AS-i buses according to specification 3.0. Detection of earth fault, double addressing and EMC problems. Rapid commissioning with the display without PC. Direct display of faults with plain-text messages. Comprehensive AS-i diagnostics integrated. AS-i configuration software is available.","OSSDs (Output Signal Switching Devices), AS-i outputs","Inputs","Logic functions ","Programmable with AsiMon software. All safety components can be programmed with different functions as inputs. The inputs can be linked with AND or OR gates or via logic functions such as FlipFlop, switch-on delay, turn-off delay or pulses. Different programs can be stored on a memory card.","AS-Interface monitor ","The monitor controls two AS-i circuits with up to 62 safe slaves and up to 16 outputs.","Display and buttons","The display is used to operate the gateway func- tionality as well as the monitor at the same time. The diagnostics and maintenance functions are considerably expanded compared to the SFM monitors. They can also be launched on the display without a PC monitor.","Incorporated security functions allow the programmed functionality to be protected and monitored."

"MSC is a modular safety controller for protecting machines and personnel. MSC is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. MSC-CB base unit with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single MSC-CB base unit can control several remote expansion modules. The MSC 'Euchner Safety Designer' Software with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every MSC-CB base unit."

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"Mosaic is a modular safety controller for protecting machines and personnel. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, non-contact switches, photocells, mechanical switches, zero-speed monitoring, safety mats, emergency stops, two-hand controls. Mosaic master M1 module with 8 inputs, 2 digital outputs and 2 pairs OSSD outputs can run stand alone or can be expanded. A single M1 module can control several remote expansion modules. The Mosaic Safety Designer Software MSD with timing, counting, logical and memory operators, communications and muting options is provided at no extra cost with every Mosaic master unit. Max configuration: 128 inputs, 16 OSSD pairs, 16 feedback restart e\/o interlock inputs and 32 status outputs.","Note: Mosaic M1 unit does not come with a MSC connector. That item must be purchased separately.","Food, Robotics, Packaging, Plastics, Material Handling, Paper, Assembly, Printing, Textile and Compactors. Due to the unique capabilities of this product, it is suitable almost anywhere that safety and flexibility are needed.","FEATURES","BENEFITS","TECHNICAL"

"AS-i master","The SBM includes an AS-i Master, which can be switched off as an option. This permits several SBMs to be operated on an AS-Interface circuit. Configuration is performed with a PC. LEDs signal the state on the device.","OSSDs (Output Signal Switching Devices) ","Safe inputs","There are four safe inputs to which safety devices without AS-i bus can be directly connected. The inputs can be optionally used as standard inputs\/ monitoring outputs, e.g. for feedback loop or start button.","Logic functions","Programmable with AsiMon software. All safety components can be programmed with different functions as inputs. The inputs can be linked with AND or OR gates or via logic functions such as FlipFlop, switch-on delay, turn-off delay or pulses. Different programs can be stored on memory cards.","AS-Interface monitor","The monitor controls one AS-i circuit with up to 31 safe slaves and up to 16 OSSDs, of which 2 are built into the device. 14 circuits can be used externally in addition."