Altech
  AltechCorporation 是一家成熟的美国零件和设备供应商,成立于1984年,产品用于工业控制,仪器仪表,医疗和自动化应用等。Altech也是DIN导轨式断路器的美国领导者。产品线Altech提供了非常广泛的产品线,包括:母线和配电电路保护装置接触器和过载继电器DC-UPS解决方案数字计时器Din外壳Eurostrips欧洲保险丝和保险丝座套圈脚踏开关工业外壳工业矩形连接器接口模块液密应变消除打标和雕刻系统仪表电机隔离开关销钉和套管设备电源按钮和指示灯安全和超薄继电器安全开关感测器智能可编程继电器接线端子测试与测量设备计时器塔灯线槽
  • Altech Corp. Keyed Interlock Switches 安全传感器开关

    "Safety switches with separate keyed actuators provide a failsafe switch function, indicating the position of guarding access points. These are typically used on hard guarding gates, panels and doors. The switches are normally mounted on the fixed frame of the machine. The actuator key mounts on the door. When the door is closed the key is inserted into the switch, closing the normally closed safety contacts."
  • Altech Corp. Keyed Safety Solenoid Locking Switches 安全传感器开关

    "Due to inertia some machines may continue to run after their power is removed. This can create a situation where it is possible to access the hazardous areas of the machine when they are still in a dangerous state. The solution to this problem is to lock the hard guarding access door closed until the machine is given enough time to wind down. The SLK and SLM series have a built in solenoid which can lock (or unlock) the activation key into the switch, preventing the door or gate from being opened."
  • Altech Corp. Non-Contact Safety Switches 安全传感器开关

    "Non-Contact Safety Switches are easy to install and offer wear free, control reliable switching which is vibration resistant and easy to clean. Both magnetic and RFID versions are available. The RFID types are available in unique or multiple coding with on board diagnostics. These units offer an OSSD solid state output, which can be used with a safety relay or for standalone applications. Remote monitoring through a separate diagnostic channel is available. Up to 32 switch can be run in series using plug in connectors."
  • Altech Corp. Safety Hinged Switches 安全传感器开关

    "Safety Hinged Switches combine the function of a load bearing hinge with a Category 4 (Ple) rated safety switch. They are easy to install and tamper resistant. Since they do not use an actuation key, there are no alignment or bend radius issues and they cannot be defeated with an extra key. The SHS series is available with 1 NC or 1 Changeover contact. The new SHS3 offers 2 NC\/1 NO contacts. Safety Hinged switches are available with the cable attached or with an M12 connector."

查看更多

登录新利18国际娱乐查看更多信息