LumaSense Technologies, Inc. IGAR 12-LO 非接触式红外温度传感器

特性

• 温度范围在300到2200°C之间
• Highest accuracy, min. 0.5% of reading + 1 °C
• 极快，响应时间=2毫秒
• 非常小的光斑尺寸，最小0.45 mm
• 双色/单色/金属模式（可切换）
• 内置激光瞄准光
• 所有参数可在仪器上调节
• 输出0…20 ma还是4…20 ma(可切换的)
• 接口rs232/rs485（可切换）
• 诊断功能
• Fibre optic and optical head withstand up to 250 °C
• Temperature ranges between 300 and 2200 °C
• 最高精度，读数的最低0.5%+1°C
• 非常小的光斑尺寸，最小0.45毫米
• 内置激光瞄准灯
• 所有参数均可在仪器上调整
• 接口RS232/RS485（可切换）
• 光纤和光学头耐高温250°C

Digital 2-color pyrometer with fibre optic for non-contact temperature measurement on metals, ceramics, graphite etc. between 300 and 2200 °C.","The pyrometer IGAR 12-LO is an digital, highly accurate 2-color pyrometers with fibre optic for non-contact temperature measurement. The pyrometer measures in the 2-color principle (ratio principle) in which two adjacent wavelength are used to calculate the temperature.","This technique offers the following advantages compared with the standard one-color pyrometers: The temperature measurement is independent of the emissivity of the object in wide ranges, it is unaffected by dust and other contaminants in the field of view, it is unaffected by dirty viewing windows, the measuring object can be smaller than the spot size. Additionally the pyrometer can be switched to 1-color mode and used like a conventional pyrometer. The metal mode allows measurements of metals and alloys with unknown k-factor (emissivity slope). The instrument is equipped with an optical fibre (length up to 30 m), which can be used in very high ambient temperatures up to 250 °C without cooling and it is unaffected by electromagnetical interferences.","Two different optical heads for different measuring distances and very small spot sizes are available. The very short response time of only 2 ms facilitates the measurement of fastest heating processes. All settings can be done directly at the instrument. The parametrizing can also be done with the PC and the standard operating software InfraWin. Additionally the software offers online temperature display and data storage. The diagnostics function allows to check pyrometer and wiring.