Burkert 宝得 423918 流量控制器

产品详细信息

流量传感器发射器模块 - 类型 SE35 操作原理是：当液体流过管道时，配件中的扳钮轮（S030 流量适配器 - 单独提供）设置为旋转，感应变换器中与流量成比例的测量频率。
之后，发射器模块将以各种模式操作并显示。
提供对中性和腐蚀性无固相液体的精确控制传感器装置通过卡口安装到管道流量适配器配件（S030 流量适配器，请参见库存号 249-7513（典型），提供接口供模块测量、监测和控制液体发射器显示模式包括：流量、输出电流、主要累计器、日常累计器（和复位功能）流量显示为升/分钟、升/小时、立方米/分钟、加仑/小时和美制加仑/小时当在设备上编程全选项并且时间测量提供无限灵活性时，可调整模式和显示器使用三个按钮进行简单的菜单驱动编程编程模式中的参数：语言、工程单位、K 因数（预置或由最终用户定义），示教功能、过滤器和重置主要累计器

The principle of operation is when a liquid flows through the pipe, the paddle wheel in the fitting (S030 Flow Adaptor -available separately) is set in rotation inducing a measuring frequency in the transducer, which is proportional to the flow. The transmitter module will then operate and display in a variety of different modes.Provides precise control of neutral and aggressive solid free liquids. Sensor unit fitted via a bayonet to pipework flow adaptor fitting (S030 Flow Adaptor, see stock no. 249-7513 typically) which provides an interface for the module to measure, monitor and control liquid. Transmitter display modes include, flow, output current, main totaliser, daily totaliser (& reset function). Flow displayed in litres\/min., litres\/hour, metres³\/min, gallons\/hour and US gallons\/hour. Modes and displays can be tailored when programming with full options on units and time measurement giving unlimited flexibility. Simple, menu driven programming using the three pushbuttons. Parameters in the programming mode: language, engineering units, K-factor (preset or defined by end user),teach-in function, filter and reset of main totaliserElectrical Connection = Cable GlandControl Output = Analogue, Pulse, Relay, TotalizerMounting Style = CompactSupply Voltage = 12 - 30 V dcDisplay Screen = 8 Digit LCDPipe Diameter Range = DN 15 - 50 mmMinimum Operating Temperature = 0°CMaximum Operating Temperature = +60°C