Fluid Components Intl. （FCI） ST75AV 质量流量计和控制器

特性

• 燃烧器和锅炉燃料和空气供给管路
• 工业炉、窑炉和烤箱燃料/空气控制
• 天然气分计量
• 冷却器空气流量测量
• 加药和注气速率控制
• 热处理气体控制工业炉、窑炉和烤炉燃料/空气控制
• 空气压缩机系统控制和使用点监控
• co-gen和涡轮发电机燃料流量测量
• 燃烧器和锅炉燃料和空气供给管线
• 天然气sub-metering
• 热处理气体控制工业炉，窑炉和烤箱燃料/空气控制
• 空压机系统控制与使用点监控
• co发电机和涡轮发电机燃料流量测量

The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow meters have no moving parts and are available for use in pipe diameters from 1\/4 inches to 2 inches, 6 mm to 51 mm. Process connection options include male NPT, female NPT, and flanged. These thermal flow meters feature wide 100:1 turndown and depending on pipe size, will measure from 0.01 SCFM to 559 SCFM 0,01 NCMH to 950 NCMH.","The ST75 Series electronics are housed in rugged, IP67 rated enclosure with dual conduit ports in either NPT or M20 threading. The instrument comes standard with dual 4-20 mA outputs and a 500 Hz pulse output. The models ST75A and ST75AV include HART or Modbus, as well as NAMUR compliant 4-20 mA outputs and SIL compliance rating. The flow meter's transmitter\/electronics can be integrally mounted with the flow element (probe) or be remote mounted to best match your installation situation. The complete instrument carries global Ex agency approvals for Division l\/Zone 1 installations.","The ST75 flow meter sensing element features precision, platinum RTD in small diameter, \"equal-mass,\" all-metal thermowells to provide superior accuracy, repeatability and fast response. The \"V\" suffix models (ST75V and ST75AV) include Vortab® flow conditioners built-in to the spool-piece to provide accurate and repeatable flow measurement installations with limited straight-run and\/or for operating in transitional flow ranges.