Red Pitaya STEMLab 125-14 LCR表

分享
  • 后询价或查看价格

  • STEMLab 125-14

  • LCR表

  • Red Pitaya

  • 请咨询供应商

  • Red Pitaya

联系销售
专家支持

"STEMlab is a multipurpose test and measurement module that has a 50 MHz frequency range with up to 14 bits of resolution. It is a very powerful and precise multifunction measurement tool that can replace a stack of lab instruments.","It is the perfect tool for educators, students, makers, hobbyists and professionals seeking affordable, highly functional test and measurement equipment. The simple and intuitive user interface provides all the necessary tools. High end specifications will satisfy more demanding users looking for powerful tools for their working benches.","All Red Pitaya applications are web-based and do not require the installation of any native software. Users can access them via a web browser using their smartphone, tablet or a PC running any popular operating system (MAC, Linux, Windows, Android, and iOS).","The LCR application will turn your STEMLab into an affordable LCR meter. It is the perfect tool for educators, students, makers, hobbyists and professionals seeking affordable, highly functional test and measurement equipment. The Resistor, Capacitors and Inductors are basic components of all electrical circuits and working on your projects you will definitely need to measure some components laying around on your working bench. The STEMLab LCR meter will enable you to do that quickly and accurately just by switching from one application to another. Note: To use the LCR meter application an additional extension module is needed. The LCR meter extension module is available on our web store. All Red Pitaya applications are web-based and don’t require the installation of any native software. Users can access them via a browser using their smartphone, tablet or a PC running any popular operating system (MAC, Linux, Windows, Android and iOS). The elements on the LCR meter application are arranged logically and offer a familiar user interface similar to bench LCR meters.","LCR meter application will enable you to measure basic parameters of the passive electrical components: R – resistance, C – capacitance, L – inductance and Z – impedance.","In addition to main parameters, secondary parameters are also measured and calculated. These parameters are common in describing the properties and the quality of the passive components. P – phase of the impedance (phase between current and voltage on measured component), D – dissipation factor (often used to quantify the quality of the capacitor), Q – quality factor (often used to quantify the quality of the inductor), ESR – equivalent series resistance","LCR meter enables measurements at 4 different frequencies (100Hz, 1kHz, 10kHz, 100kHz). The user can select the desired frequency and the LCR application will use sine signals with the selected frequency to measure the impedance.","Since the measured values are unknown, the LCR meter will adjust the measuring range providing the best accuracy. If the user expects some value in creating ranges, then the Manual mode can be used."

特性

  • Measurements modes: Tolerance, Relative, Normal The Tolerance and Relative buttons are used for measuring in the Tolerance and Relative mode. When deselected, the LCR meter measures in the Normal mode.
  • Tolerance mode: the last value measured before clicking the Tolerance button is saved and used to calculate the percentage difference between the new value and the saved one.
  • Relative mode: the last value measured before clicking the Relative button is saved and used to calculate relative difference between the new value and the saved one. Equivalent Parameters calculation circuit: Parallel, Series The Parallel and Series measuring modes refer to using the Series or Parallel equivalent circuit for the parameters (R, C, L...) calculation from the measured Impedance Z *. LCR meters will only measure Z as the complex value Z=|Z|e^(jP) where P is the measured phase and |Z| is the impedance amplitude. All other parameters are calculated from the Series or the Parallel equivalent circuit.
  • Export of measured data in .csv format
  • Min, Max, Average measurements
  • 1000 logging points

STEMLab 125-14 LCR表技术参数

点击查看 0 个替代产品
规格项 参数值 勾选搜索替代
特 性
带宽 100000 Hz
最大通道数 4 #
电容量程 1.00E-6 to 100000 microF
电阻量程 0.0100 to 10000 kohms
选项和功能 Has Application Software for Host Computer; Data Acquisition; Removable data storage
连 接 & 显 示
输出接口 Universal Serial Bus; RS232 (optional feature); I2C, SPI, UART, WiFi, Ethernet
显示类型 Web Based ;Other
物 理
外观形式 Computer Board
更多技术信息
标准和认证 CE Marking
更多规格
产品类别 LCR Meters

产品替代

找到 个替代产品

电磁和电量传感器交流圈

约5圈友等你加入

    加载中···

    专家支持

    0 / 300

    选择图片

    确定提交

    提交成功

    系统自动将您的问题推送给专家解答

    查看专家解答
    请扫码进入传感圈小程序

    如何查看专家解答您的问题?

    1
    2
    3
    4