产品介绍
特性
- 20 Measurement Parameters
- Frequency Range 20 Hz to 1MHz
- 0.1% Basic Measurement Accuracy
- Measurement Speeds Up to 40/sec
- DC Resistance Measurements
- Monitoring of DUT Voltage and Current
- 5 Digit Measurement Resolution
- Programmable DC Bias Voltage, 0-2V
- Constant Voltage (Voltage Leveling)
- IEEE-488, RS-232 & Handler Interfaces, all Standard
- Open/Short Zeroing & Cable Compensation
- Load Correction
- 14 Pass/Fail Bins
- Keypad Lockout
- Range: 20Hz to 1MHz, Continuous
- Resolution: 1Hz from 20Hz to 1kHz,
- 4 digits >1kHz
- Accuracy: ± (0.02% +0.02 Hz)
- Speed: Accuracy Setting
- 40 meas/sec: Low, No Display
- 25 meas/sec: Low
- 10 meas/sec: Medium
- 1 meas/sec: High
- Automatic, Range Hold or user selectable
- Internal (automatic)
- External (via RS-232, IEEE-488.2 or Handler)
- Manual
- 5Ω, 25Ω, 50Ω, 100Ω
- Voltage: 20mV-1.0V (open circuit), 5mV steps
- Internal: 0 to 2V in 1mV steps
- LCD Display with backlight
- Pass/Fail and status indicators
- Engineering or scientific format
- %Deviation from nominal of primary parameter
- Deviation from nominal of primary parameter
- Pass/Fail
- No Display Mode for maximum throughput
- Displays up to 6 sequential test results, primary and/or secondary
- IEEE-488.2, RS-232, Handler
- Programmable from 0 to 1000ms in 1ms steps
- Programmable from 1 to 1000
- Averaged over last three measurements
- 30 Single Tests
- 10 Sequential (6 tests in each)
- Constant Voltage Mode (voltage leveling)
- Cable Compensation (1M, 2M, no cable)
- Open/Short Zeroing
- Distortion Check
- Recommended interval 1 year
- NIST traceable calibration
- Built-in automatic calibration procedure
- Displays last calibration date, standard values used in calibration
- Verifies critical instrument operation at power-up or when selected from menu
- Front panel, four terminal (BNC)
- Optional Test Fixtures Available
- Bench mount with tilt bail
- Rack mount kit optional
- (w x h x d): 17 x 5.25 x 16 in (432 x 133 x 406 mm)
- Meets MIL-28800E, Type 3, Class 5, Style E & F
- Operating: 0° to +50°C
- Humidity: < 75% for 11° to 30°C operating
- Storage: -40° to +71° C
- 100-240 VAC 50/60 Hz, 100 W Max
- Fast Production Testing of LCR Components and Materials
- AC Impedance & DC Resistance Measurements
- Component Characterization Over a Wide Frequency Range
- Component Screening, Evaluation and Design
"The 1920 is a 1 MHz LCR Meter from Quadtech. An LCR meter is a piece of electronic test equipment that measures inductance (L), capacitance (C), and resistance (R) of electronic components. The LCR meter accurately measures these elements on an electronic device, usually one subjected to an alternating current (AC) voltage source. The LCR meter measures the current through and voltage across the device under test.","Additional Features:","Specifications","Test Frequency: ","Measurement Speed:","Ranging: ","Trigger:","Source Impedance: ","AC Test Signal: ","DC Bias Voltage: ","Display: ","Results Formats: ","Sequencing: ","Standard Interfaces:","Measurement Delay:","Averaging: ","Median Value: ","Setup Storage: ","Other: ","Calibration: ","Usage & Cal Data: ","Self Test: ","Test Terminals: ","Mechanical: ","Dimensions:","Environmental: ","Power: ","Applications","The 1920 is a high performance LCR Meter designed to perform fast, automated impedance measurements on a variety of electronic components and materials. The instrument has a basic accuracy specification of 0.1% for accurate test results over a wide frequency range, from 20 Hz to 1 MHz. Besides 15 impedance parameters the 1920 is also capable of measuring DC resistance as well as monitoring the voltage across or current through the device under test. The unit incorporates a distinctive sequence test mode, allowing up to 6 uniquely different tests to be performed quickly on a single start command. Additionally, the 1920 includes IEEE-488, RS-232, and handler interfaces, all standard.","20 Measurement ParametersMeasure and display any two of 15 impedance parameters simultaneously, with a basic accuracy of 0.1%. Additionally, the 1920 can measure the DC resistance, or display the current through or voltage across a test device ensuring the operator of the real test conditions.","Wide FrequencyOver 27,000 user programmable test frequencies to fully characterize devices over the range of 20 Hz to 1 MHz.","Automatic Test SequencingFor increased productivity and throughput the 1920 can perform up to six different tests in sequence with a single push of the start button. Each test can have different measurement parameters, test conditions and limits.","DC Bias VoltageThe instruments internal DC bias voltage source, programmable from 0 to 2 V in 1 mV steps, allows capacitors to be tested under real DC bias conditions.","Setup Storage\/RecallThe test operator has the ability to store and recall, from internal memory, up to 30 single test setups and 10 sequential setups (six tests in sequence). The front panel can be locked out, with password protection, to ensure that procedures are run the same way every time.","Load CorrectionSubstantially improves instrument accuracy by allowing the operator to specify the value of a known standard, measure it, and apply a correction to ongoing measurements.","Programmable Source ImpedanceThe operator is able to set instrument source impedance at 5, 25, 50 or 100 ohms, an important feature when comparing measurements to those made on other testers. Measurement results can vary substantially based solely on the source impedance of the tester being used."
产品替代
资料下载
文件名称 | 大小 | 操作 |
---|---|---|
QuadTech 1920 | 262.03 KB | 下载 |
声明:本产品内容及配图源自互联网收集或平台用户自行上传,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容真实性,不承担此类作品侵权行为的直接责任及连带责任。如涉及作品内容、版权等问题,请联系本网处理,侵权内容将在一周内下架整改。
LCR表相关品牌
LCR表同类产品
加载中···