产品介绍
Two 2series pressure sensor module is consists of corrosion-resistant pressure sensor header, signal conditioning circuit and additional electronic components. The pressure sensor systems mounted on FR4 PCB. This temperature compensated and calibrated sensor provides an accurate, high level analog supply current that is proportional to applied pressure. The maximum pressure rang of the sensor cell is 0~3 MPa pressure. The supply voltage is 5±0.5V,the type supply current is 2.5mA. The pressure sensor module has the features of the small form factor and high reliability.
Operating Characteristics
Table 1. Operating Characteristics (VS = 5.0 Vdc, TA = 25°C).
Notes:
1. Device is ratiometric within this specified excitation range.
2. Full Scale Span (VFSS) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the minimum rated pressure.
3. Accuracy is the deviation in actual output from nominal output over the entire pressure range and temperature range as a percent of span at 25°C due to all sources of error including the following:
Linearity:Output deviation from a straight line relationship with pressure over the specified pressure range.
Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to and from the minimum or maximum operating temperature points, with zero differential pressure applied.
Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the minimum or maximum rated pressure, at 25°C.
TcSpan: Output deviation over the temperature range of 0 to 85°C, relative to 25°C.
TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0 to 85°C, relative to 25°C.
Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of VFSS, at 25°C.
4. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a specified step change in pressure.
5. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
6. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
MAXIMUM RATINGS(1)
Table 2 MAXIMUM RATINGS(1)
Rating | Symbol | Value | Unit |
Maximum Pressure | PMAX | 2 times of range | kPa |
Maximum Supply Voltage | Vmax | 24 | Vdc |
Maximum Supply Current | Imax | 20 | mAdc |
ESD(MIL 883, Method 3015.7.) | ±4 | kV |
产品替代
声明：本产品内容及配图源自互联网收集或平台用户自行上传，目的在于传递更多信息，并不代表本网赞同其观点或证实其内容真实性，不承担此类作品侵权行为的直接责任及连带责任。如涉及作品内容、版权等问题，请联系本网处理，侵权内容将在一周内下架整改。
油压力传感器相关品牌
油压力传感器同类产品
加载中···
