产品介绍
特性
- 接触式传感器设计,满足usp对注水的要求。
- 预校准的传感器为0.01。0.1和1.0/cm的单元格常数
- 所有润湿塑料和弹性体符合21cfr177。
- 所有潮湿表面都有0.4微米ra光洁度。
- 提供VARIOPOL(VP)快速断开接头。
- 可提供variopol (vp)快速断开接头。
Model 403 and 403VP sensors are intended primarily for the determination of conductivity in water-for-injection (WFI). The sensors are also used in water purification systems in the food and beverage industry.","The sensor has titanium electrodes with a PCTFE (Neoflon®) insulator and EP O-rings. The Tri-Clamp® sanitary flange is 316 stainless steel. All wetted plastics and elastomers are compliant with 21CFR177, and all wetted surfaces have a16 microinch (0.4 micrometer) Ra finish. The sensor is shipped with a certificate of conformance for materials and surface finish.","The maximum temperature is 221°F (105°C), and the maximum pressure is 250 psig (1825 kPa abs). The sensor also tolerates steam in place. Both integral cable (Model 403) and quick disconnect Variopol cable (Model 403VP) are available.
Model 403&403VP 导电电极技术参数
规格项 | 参数值 | 勾选搜索替代 |
性 能 | ||
电导率范围 | 0.0 to 20000 MicroSiemens/cm | |
特 性 | ||
工作压力 | 0.0 to 250 psi (0.0 to 176 m H2O) | |
电导池(电极)常数 | 0.01; 0.1; 1 | |
环 境 | ||
工作温度 | 32 to 221 F (0.0 to 105 C) | |
物 理 | ||
最大长度 | 3.5 to 9.6 inch (88.9 to 244 mm) | |
最大直径/宽度 | 0.6200 to 0.7500 inch (15.75 to 19.05 mm) | |
安装形式 | In-Line | |
更多规格 | ||
产品类别 | Conductivity Electrodes |
产品替代