产品介绍
特性
- 燃烧空气
- 废气流
- 一次风、二次风和火上风流
- 预热器的气流
- 锅炉送风流量
- 烟气流量
- 排放流量监测/报告(cems)
- 暖通空调控制
- 一次、二次和过热气流
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe\/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and non-repeatable flow measurement. FCI's MT100 places up to eight (8) flow sensing points in the flow stream and averages them which results in a highly accurate and repeatable flow rate measurement. Unlike other large pipe flow meters, the MT100 has no moving parts or orifices to foul or clog. The insertion design, in the same plane, makes them an easy and lower cost solution to install. There are solutions for use in fluid temperatures up to 850°F 454°C. The electronics feature dual 4-20mA outputs with HART and Modbus and, optionally Foundation Fieldbus or PROFIBUS, a best-in-class touch type, large digital + graphical LCD display, data logging, calibration self-checks and easy access to wiring. Transmitter enclosures are highest quality, corrosion resistant stainless steel. The MT100 Series multipoint thermal flow meters are your solution for large diameter pipe and air ducts applications.
MT100M 气体流量计技术参数
规格项 | 参数值 | 勾选搜索替代 |
特 性 | ||
工作压力 | 0.0 to 100 psi (0.0 to 70.38 m H2O) | |
介质温度 | 850 F (454 C) | |
测量介质 | Gas | |
特征 | Multi-insertion; Programmable | |
电 气 | ||
电气输出 | Current; Switch; Voltage | |
连 接 & 显 示 | ||
接口选项 | Serial/Digital; Network/Fieldbus | |
环 境 | ||
工作温度 | -40 to 150 F (-40 to 66 C) | |
物 理 | ||
终端配件 | MNPT or DIN50 ;Other | |
管道直径 | 2.00 inch (50.8 mm) | |
安装 | Insertion | |
更多技术信息 | ||
仪表类型 | Mass Flow Meter | |
更多规格 | ||
面板接口 | Digital Front Panel | |
产品类别 | Gas Flow Meters | |
精度 | 2 ±% | |
审核认证 | ATEX; NEMA, ISO/IEC, NIST, CRN, US EPA CEMS(Optional) | |
测量技术 | Thermal |
产品替代
气体流量计相关品牌
气体流量计同类产品
加载中···