特性

• 夹紧式流量和温度传感器
• 速率和总热量/能量需求
• modbus通信
• 带背光的LCD
• Modbus通信
• 与背光液晶

The new heat\/energy metering solution from Micronics. Simple, low cost, hot or chilled water energy measurement from outside the pipe. A smarter solution than in-line meters!","The U1000 HM is an ultrasonic clamp-on heat\/energy meter that uses ultrasound to measure flow rate and PT100 temperature sensors to measure flow and return temperatures. The U1000 HM displays energy rate and totalised energy with pulse output and Modbus communication, so it can be used as a standalone meter or as an integral part of an aM&T or BEM’s system.","Simple to install – clamp-on to the pipe, set the pipe diameter and connect the power, no specialist skills or tools required and Modbus compatible.","Measurement Technique: Transit time and PT100 Class B 4 wireTurn Down Ratio: 200:01Heat Meter Standard: The Heat\/Energy calculation is designed to comply with EN1434 section 6, third party certification pending.","Accuracy: +\/-1-3% of flow reading for >0.3m\/s","Flow Velocity Range: 0.1 to 10m\/s","Pipe Range: 25mm – 115mm OD","Water Temp Range: 0°C to 85°C","Temperature sensors: Clamp-on PT100 Class B 4 wire, range 0 to 85°C, resolution 0.1 °C","Output: KWh energy or volume flow pulse","External Power Supply: 12V-24V +\/- 10% AC\/DC at 7 watts","Electronics Enclosure: IP54","Input\/Output Cable: 5m x 6 core for power in and data out","Dimensions: 250mm x 48mm x 90mm (electronics + guide rail)","Modbus Communication:Modbus RTU slave, RS485 serial link hardware layer.