"EOS2, a Type 2 light curtain with its compact housing profile and minimum dead zone, is ideal for the protection of any tool machine, in particular where space restrictions exist. Its very small dead zone, only present on one end, allows EOS2 to keep its resolution up to 30 mm if installed on a plan and up to 40 mm if installed at 90° against another EOS unit. EOS2 can easily connect with a remote safety controller using M12 connector unshielded cable in runs up to 100 meters. Models are available with the integration of start-restart interlock and external contactor monitoring (EDM), as well as automatic restart.","Assembly lines, automatic wearhouses, wood-working machines, assembly and other small machinery","FEATURES","BENEFITS","TECHNICAL"

特性

• Protected height range from 160 to 1510mm
• Multiple detection types
• Selectable scan range of 4 or 12 meters
• Self-monitoring static outputs
• Integrated Start / Restart
• External device monitoring (EDM)
• Master - Slave configuration available
• 30-40mm resolution
• 50-90mm resolution
• 2-3-4 beam for body detection
• Master/Slave separation 50 meters max
• Achieves the highest level of safety
• Achieves Safety Category 2
• Compact 28x30mm housing good for small installations
• IP69K enclosure available
• No blind area at one end and minimal blind end at connector end
• Compatible with Mosaic, AD SR, Euchner ESM-BA, commercial safety modules and safety PLCs
• Approved for Safety Category 4
• General Specifications:
• Ambient operating temperature -10 to 55°C
• 2 safety PNP static outputs rated 400mA
• M12, 5-pin and 8-pin connectors
• Operating voltage 24VDC +/- 20%
• Power consumption:
• Type 2, SIL 1, SILCL 1, Cat2/PLc
• 28x30mm cross section
• Environmental protection IP65 and 67
• Emitter 1 Watt
• Receiver 2 Watts