特性

• Normally Closed Switch, Stainless Steel
• Normally Closed Switch, PVC
• 230 Switch with contact relay for Normally Open applications, Stainless Steel
• 230 Switch with contact relay for Normally Closed applications, PVC
• 230 Switch with timer
• Normally closed contacts.
• Normally open contacts.
• Stainless steel or PVC housing.
• 12.5 amp switch contacts.
• 500 lb. test chain.
• Easy to install..
• 25 to 30 degree deflection angle.

"The Model 230 Tilt Switch is designed to detect material spillage or gob off at the conveyor belt transfer points and remove power from the dumping conveyor to prevent further spillage and conveyor system damage. The Model 230 normally closed Tilt Switch ships ready to use and the Model 230A normally open package includes a Model 230 with separate contact relay. The solid state sealed switch is complemented by a 500 lb. test chain which makes mounting a snap. The 1\/8 in. thick stainless steel tube with rubber bumper makes this unit the most durable on the market. Units are also available in a lighter PVC casing. An optional timer relay can be purchased to eliminate any nuisance tripping problems you may have.","When applying the Tilt Switch to the detection of material spill conditions, proper selection of the installation site is critical for satisfactory operation. Although each installation will require its own unique mounting, in general, the Tilt Switch should be positioned to make contact with the spilled material before excessive amounts have been dumped on the ground. Suggested installation is to hang the sensor from the conveyor structure a few feet behind the last roller. Material not carried away by the receiving belt will be pulled under the loading conveyors end roller and be detected by the switch.","MODEL 230"," MODEL 230P","MODEL 230A"," MODEL 230AP","MODEL 230S"