RLC2HD is a PCB level incremental encoder sensor system consisting of a PCB sensor and a magnetized ring. It has been designed for embedded motion control applications as a position control loop feedback element in space constraint applications.","The information carrier is a periodically magnetized ring with a pole length of 2 mm. Radial or axial reading of the ring is possible. The readhead can ride at up to 0.4 mm from the ring's surface.","State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature ranges. The position information is output in incremental quadrature format with the option of a periodic reference mark (every pole).","The maximum speed depends on the chosen resolution and minimum edge separation time, to 7.5 m\/s at 1 µm and to 75 m\/s at approx. 10 μm.","The RLC2HD is a moisture sensitive device. It should be soldered immediately after the transportation packaging has been opened. If not, baking procedure should be performed.