Robust, compact, precise: Baumer presents new multiturn encoder for mobile machines

2024-03-11
关注

New, non-contact EB360R has been particularly designed for mobile machines and ensures reliable and maintenance-free operation even in harsh environments. Long-term tight thanks to fully encapsulated electronics.

Sensor expert Baumer adds another highlight to its portfolio of compact multiturn encoders for mobile ma-chines. New non-contact encoder EB360R has been particu-larly designed for mobile machines and is free from mainte-nance even in harsh environments. That's typical Baumer: The encoder merges maximum performance with compact design for precise angle position and speed feedback, even where it's dirty, wet or hot. Robust EB360R will also endure vibration and shocks. Hence, the wear-free encoder is the product to choose for use in construction vehicles, working platforms or agricultural machines. In this way Baumer is living up to its pioneering spirit in encoder technology: EB360R is the most compact non-contact multiturn encoder being this precise and adds on the broad Baumer portfolio for mobile applications.

No chance for dirt, dust or fluids

EB360R bearingless magnetic encoder owes its high robustness to the non-contact sensing principle com-prising the sensor and a separate magnetic rotor. Angle position and number of revolutions are determined without any moving parts inside the sensor. The sensor is mechanically and thermally decoupled. Unlike conventional rotary encoders, there is no shaft leading inside. The sensing electronics of EB360R is fully en-capsulated to prevent any ingress of liquids or dust. Such thoroughly encapsulated electronics in a corrosion-resistant plastic housing is another extra protection against shocks and vibration.

Space-saving design yet maximum performance

The Baumer team of developers has designed the EB360R particularly for use in severe harsh outdoor con-ditions. Until now, industrial encoders deployed in mobile machines could not cope for long with the material-consuming working conditions present on muddy construction sites, snow-covered slopes and dusty raw ma-terial mining. In the development of EB360R Baumer strived to exploit to the utmost any option to cut the housing size down to a minimum - while maximizing robustness in parallel. "A great deal of the practical field experience made by our broad customer base in the mobile machine industry has gone into the develop-ment" reports Product Manager Sebastian Köster.

Long-term tight, ultra-robust The requirements for the new encoder designed for mobile machines were am-bitious and clear right from the start. Köster: "It was our aim making EB360R set a new encoder standard for mobile machines: a bearingless multiturn encoder that is ultra robust, minimized in size and maximized in precision." From the developer's point of view, this has been a success. With a housing of just 22 mm in height when installed, the encoder in space-saving design provides maximum freedom in machine design. And what about measuring precision? "Best-in-class in the category of bearingless, magnetic multiturn en-coders of this size," says Köster.

However, most important for reliable continuous outdoor operation is long-term tightness. EB360R has passed conventional tests like IP67 and IP69K with ease. However, this does not say much about long-term tightness after many years of tough outdoor use. EB360R has proved fully reliable even after aggressive, simulated accelerated ageing in highly demanding tests, i.e. temperature shocks by immersion bath. The en-coder will perform reliably even after being cyclically heated to 85 ºC and right away immersed in salt water of 0°C. "A real challenge that - if passed - guarantees safe outdoor operation," says Köster.

EB360R in brief

Non-contact absolute encoder «Designed for Mobile Machines» 
Application fields: Angle measurement at booms, Speed monitoring suitable for vehicles such as excavators, dump trucks, working platforms, harvesters, tractors, wood harvesters, etc.
Available as singleturn or multiturn encoder Interfaces: CANopen, SAE J1939, SSI Corrosion-resistant plastic housing
IP69K protection
High resistance to vibration and shocks up to 500 g
Temperature resistant from-40 ºC up to 85 ºC
Adjustable gear factor and freely adjustable resolution

Learn more: www.baumer.com/c/47029
 

您觉得本篇内容如何
评分

相关产品

Honeywell 霍尼韦尔智能工业 在线/便携烟气分析仪专用传感器 气体传感器

CO 传感器;SO2传感器;NO2 传感器;NO传感器;氧气传感器

南方泰科 TGM 压力传感器

TGM是一款SOP8封装的压阻式MEMS压力传感器,其压力传感器芯片封装在 SOP8 塑封壳内。在传感器压力量程内,当用固定电压供电时,传感器产生毫伏输出电压,正比于输入压力。压力传感器芯片为绝压,可提供不同的压力量程的SOP8 压力传感器。

Huba Control 富巴 525系列 压力传感器

525系列压力传感器采用集公司20多年研发经验的陶瓷压力传感器芯片技术。该系列压力传感器可选压力范围大,电气连接形式多。最小量程为50mbar。大批量使用具有很好的性价比。

Cubic 四方光电 PM3009BP 室外粉尘传感器

PM3009BP是一款专门针对餐饮油烟监测的油烟传感器,其采用旁流采样方式,自带除水雾装置,结合智能颗粒物识别算法,确保传感器能够快速准确的检测油烟浓度的变化,同时创新的镜头自清洁技术的应用,能够长效防护传感器油烟污染,大幅度延长传感器的使用寿命。

Winsen 炜盛科技 MH-410D 红外CO2气体传感器 红外传感器

MH-410D红外气体传感器是通用型、智能型、微型传感器,该红外传感器利用非色散红外(NDIR)原理对空气中存在的CO2进行探测,具有很好的选择性,无氧气依赖性,性能稳定、寿命长。内置温度补偿。该红外传感器是通过将成熟的红外吸收气体检测技术与微型机械加工、精良电路设计紧密结合而制作出的小巧型高性能红外传感器。该红外传感器可广泛应用于暖通制冷与室内空气质量监控、工业过程及安全防护监控、农业及畜牧业生产过程监控。

Alliance 莱恩&联众传感线缆 Aurora Tool Cable 医疗电线 医疗线缆

用于连接两个5DOF传感器或一个6DOF传感器的电缆。 可重复使用 用于电磁跟踪系统

RAYCOH 锐科智能 30GM系列 IO-Link输出 2EP-IO,IUEP-IO 超声波测距传感器和接近开关

RAYCOH 锐科智能30GM系列 IO-Link输出 超声波线性位置传感器和开关

鑫精诚传感器 XJC-T001 压力传感器

◆传感器激光焊接密封,环境适应性较强 ◆球形联接件,始终保持模块的垂直称重状态 ◆支撑螺栓,防止设备倾覆且方便维护 ◆接地装置,保护传感器免受电源浪涌冲击 ◆过载保护装置,保护传感器免受冲击力

评论

您需要登录才可以回复|注册

提交评论

提取码
复制提取码
点击跳转至百度网盘