Martin Audio有限公司，C10.1R专为天花板较高或需要更高SPL的场馆设计。C10.1R采用了专有的同轴10英寸（250毫米）低音驱动器，带有阻尼良好、阻燃、纤维圆锥体和1英寸（25毫米）直射杆压缩驱动器。通过使用精密设计的杆件和铝制延长件将压缩驱动器与锥形喇叭相匹配，锥形喇叭和喉部形成了完美的喇叭加载，使C10.1R在其90°的覆盖范围内非常可控地分散。C10.1R是为适应Lowell和Atlas矩形后部外壳和格栅而制造的。
Community Professional Loudspeakers","The DS8 is a full-range, compact, two-way system, ideal for installations where space is a premium. Easily outperforming loudspeakers of a larger size format, the DS8 provides high power handling, high sensitivity and realistic sound reproduction.","The Distributed Design Series DS8 is a full-range, compact, two-way system, ideal for installations where space is a premium. Easily outperforming loudspeakers of a larger size format, the DS8 provides high power handling, high sensitivity and realistic sound reproduction. With a modern architectural appearance that aesthetically merges well in most environments, combined with weather-resistant capability suitable for indirect outdoor use, the DS8 can be used in a wide variety of speech and music applications. It is equipped with a built-in autoformer, allowing the full loudspeaker output to be realized with 70V or 100V distribution lines. A convenient front-accessible power tap switch is hidden behind a rotatable logo. Installation is simple and flexible using the included Infin-A-Ball™ multi-angle wall mounting bracket which allows low profile mounting and precise positioning of the enclosure over a broad tilt-swivel range.
Electro-Voice","The Electro-Voice® Xcb is an 18-inch, low-frequency system. It is designed for more modest low-frequency requirements and for smaller load ins and load outs. Two-thirds-height enclosure shell.
Electro-Voice","The Electro-Voice® Xi-1152A\/64F is a loudspeaker system designed for high-SPL, limited-space applications and down-fill in larger arrays. The speaker features a ND6 three-inch, titanium, high-frequency compression driver with a neodymium motor. The Xi-1152A\/64F also features an EVX-155 woofer with four-inch voice coil for prodigious output to 50 Hz. It also includes integral carrying handles and a stand-mount adapter for 100BK stand.
Electro-Voice","The Electro-Voice® Xi-1152A\/94F is designed for high-SPL, limited-space applications and down-fill in larger arrays. The system features a ND6 three-inch, titanium, high-frequency compression driver with a neodymium motor. The Xi-1152A\/94F also features an EVX-155 woofer with a four-inch voice coil for prodigious output to 50 Hz. It also includes integral carrying handles and a stand-mount adapter for 100BK stand.
Electro-Voice","The Electro-Voice® Xi-1191A(F) features a vented-box design that uses a single EVX-180B subwoofer. This subwoofer features a 102-mm (four-inch) voice coil and an extremely high XMAX (maximum linear excursion) for very high sound pressure levels at very low frequencies. The Xi-1191A(F) enclosure is constructed of 18-mm, 13-ply birch plywood and is available in a black or white textured, paint finish. The flying system includes four full-track flying points (two on the top and two on the bottom). Both flying (Xi-1191AF) and nonflying (Xi-1191A) versions are available. The Xi-1191A(F) loudspeaker system is an ideal choice for any professional installation or regional touring application where accurate low-frequency sound reproduction at high sound-pressure levels is required. The Xi-1191A(F) with Dx38 Digital Signal Processor create an ideal solution to subwoofer applications where high acoustic power is required from 32 Hz to 160 Hz. The Xi-1191A(F) is designed specifically to be used in conjunction with the full-range Xi-A systems (such as Xi-1122A\/85, Xi-1152A\/64 & \/94, Xi-1123A\/106, Xi-2123A\/106, Xi-1153A\/64, Xi-1183A\/64, Xi-2153A\/64, Xi-1122MHA\/64 and Xi-2122MHA\/42).
Electro-Voice","The Electro-Voice® Xi-2122MHA delivers unprecedented high-level output in a two-way design. It features dual ND12A 12-inch, neodymium, mid-bass drivers, and a coaxially mounted, dual ND6-16 three-inch diaphragm. The Xi-2122MHA also features a high-frequency compression driver for very high output. The system has a far-field, long-throw, 40 degree x 20 degree coverage pattern, and comes with built-in L-Track rigging. The footprint is identical to the Xi-1153A, Xi-1183A, Xi-2153A, Xi-1191A (F) and Xi-2181A (F).
Electro-Voice","The Electro-Voice® ZXA5 combines the performance of DVX and ND2 with a high-output, dual-channel, integrated amplifier. Effortlessly delivering a continuous 250 watts to high-frequency and 1,000 watts into the low-frequency, the ZXA5 boasts an unprecedented power-to-weight ratio, and performance that is unmatched by powered systems that cost twice as much. In addition to its incredible sonic abilities, the ZXA5 retains all of the functionality of the passive ZX5 in terms of accessories, mounting options, and multi-angle monitors.
