小程序
传感搜
传感圈
电源系统
行业应用
精准 模糊
应用场景
广告

相关阅读

广告

  • Visual Sound XTi 4000 音频放大器和前置放大器

    皇冠国际公司，XTi系列皇冠放大器是为便携式PA应用设计和制造的专业工具。该系列包括三个型号相同，除了输出功率：XTI1000，2000和4000。所有这些都是坚固和轻巧的，并提供无与伦比的价值在他们的同类产品中。*集成专有DSP和LCD前面板显示*准确，未着色的声音非常低失真，最好的音乐和声音复制*先进的保护电路防止：短路输出，开路，直流电，不匹配的负载，一般过热、高频过载和内部故障*功能极为广泛，可处理各种扬声器阻抗和输出*开关模式通用电源*用于交叉频率、均衡器、限制和延迟的扬声器预设*所有产品填充2U机架空间，重量不到17磅；重量设置了一个新的轻量化安培标准（减少20%）*Speakon®和绑定柱输出、卡侬输入和环路通过*每个通道的全面LED状态*三年，无故障，完全可转让保修完全保护您的投资和保证其规格

  • RS Components 欧时 E3FA-RN11 2M 接近传感器

    主体形状:Threaded Barrel
    电气连接:Pre-Wired Cable
    工作距离:3.94 to 157 inch (100 to 4000 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FA-RN11 2M
    产品类别:Proximity Sensors
    主体形状:Threaded Barrel
    电气连接:Pre-Wired Cable
    工作距离:3.94 to 157 inch (100 to 4000 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FA-RN11 2M
    产品类别:Proximity Sensors

  • RS Components 欧时 E3FBRP22 接近传感器

    主体形状:Threaded Barrel
    电气连接:4-Pin M12 Connector
    工作距离:0.0039 to 19.69 inch (0.1000 to 500 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FBRP22
    产品类别:Proximity Sensors
    主体形状:Threaded Barrel
    电气连接:4-Pin M12 Connector
    工作距离:0.0039 to 19.69 inch (0.1000 to 500 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FBRP22
    产品类别:Proximity Sensors

  • RS Components 欧时 E3FBVP21 接近传感器

    主体形状:Threaded Barrel
    电气连接:4-Pin M12 Connector
    工作距离:0.3937 to 1.97 inch (10 to 50 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FBVP21
    产品类别:Proximity Sensors
    主体形状:Threaded Barrel
    电气连接:4-Pin M12 Connector
    工作距离:0.3937 to 1.97 inch (10 to 50 mm)
    技术:Photoelectric Sensors
    制造商:OMRON Automation and Safety
    产品型号:E3FBVP21
    产品类别:Proximity Sensors

  • Sitron Proximity Sensor Capacitive + RL202 Controller 液位开关

    开关常态:Normally Open (NO); Normally Closed (NC)
    产品类别:Liquid Level Switches
    工作温度:14 to 176 F (-10 to 80 C)
    Maximum  Pressure:145 psi (102 m H2O)
    Technology:Capacitive/RF Admittance
    开关常态:Normally Open (NO); Normally Closed (NC)
    产品类别:Liquid Level Switches
    工作温度:14 to 176 F (-10 to 80 C)
    Maximum  Pressure:145 psi (102 m H2O)
    Technology:Capacitive/RF Admittance

  • Sitron Proximity Sensor Capacitive + RL202 Controller 料位开关

    开关常态:Normally Open;Normally Closed
    最大工作压力:145 psi (102 m H2O)
    介质:Liquid; Dry material (Bulk solids and powders)
    测量技术:Capacitive / RF Admittance
    工作温度:14 to 176 F (-10 to 80 C)
    产品类别:Level Switches
    开关常态:Normally Open;Normally Closed
    最大工作压力:145 psi (102 m H2O)
    介质:Liquid; Dry material (Bulk solids and powders)
    测量技术:Capacitive / RF Admittance
    工作温度:14 to 176 F (-10 to 80 C)
    产品类别:Level Switches

  • Delta OHM HD49-S-17-E-TO2-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-77-E-TC1-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-07-E-TO2-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-01-E-TO2-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD49-S-77-E-TV-10-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • Delta OHM HD48-S-17-E-TV-2-L 湿度传感器

    HD48… and HD49… series of transmitters measure temperature, relative humidity and the dew point temperature.Versions with only standard analog output or with only RS485 output with MODBUS‑ RTU protocol are available. The models with analog output provide a signal suitable for transmission to a remote display, recorder or PLC. The models with RS485 output are suitable for connection to a PC or PLC.The models of the HD48… series are active transmitters and accept both direct and 24Vac alternating power supply; they have standard current (4…20 mA) or voltage (0…10V) outputs, or a serial RS485 output, depending on the model. The models of the HD49… series are passive transmitters and thus suitable to be inserted in a 4…20 mA current loop.Both series of transmitters are designed for temperature and humidity control in conditioning and ventilation applications (HVAC/BEMS) in the following sectors: pharmacy, museums, clean rooms, ventilation ducts, industrial and civil sectors, crowded places, canteens, auditoria, gyms, high-density farms, greenhouses, etc.The transmitters measure relative humidity with a well proven temperature compensated capacitive sensor that assures precise and reliable measurements in the course of time. Both HD48… and HD49… series are available in two probe temperature ranges: standard -20…+80 °C and extended -40…+150 °C for the most critical applications. A stainless steel 10 μm filter protects the sensors against dust and particles (other filters are available for different applications).The transmitters are factory calibrated and no further adjustments are required.Each series is available in different versions: with horizontal probe for duct mounting (HD48…TO…, HD49… TO…) with vertical probe for wall mounting (HD48…TV…, HD49… TV…); with remote probe connected to the transmitter by means of a cable (HD48…TC…, HD49…TC…). Cable lengths available are 2, 5 and 10 m. The probes can be supplied in two different lengths: 135 mm or 335 mm. Various accessories are available for the installation: for example to fix the probe to the duct, it can be used the HD9008.31 flange, a 3/8” universal biconical connection or a PG16 metal cable gland (Ø 10…14 mm). A 4-digit optional display (“L” model) allows to display the measured parameters in a continuous or sequential mode.

  • TURCK 图尔克 100010341 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：1000 ppr

  • TURCK 图尔克 100010345 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：3600 ppr

  • TURCK 图尔克 100010343 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：2048 ppr

  • TURCK 图尔克 100010347 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：5000 ppr

  • TURCK 图尔克 100010344 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：2500 ppr

  • TURCK 图尔克 100010339 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 10mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：360 ppr

  • TURCK 图尔克 100010348 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 12mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：360 ppr

  • TURCK 图尔克 100010354 增量式编码器

    增量式编码器，工业线，同步法兰，Ø 58mm，实心轴，Ø 12mm x 20mm，光学测量原理，轴材料：不锈钢，5...30 VDC，RS422/TTL带逆变，脉冲频率最大300 kHz，连接器，M12 x 1，8针，外壳和轴侧保护等级IP67，-40...+85 °C，最大6000 rpm（连续操作：3000 rpm），分辨率增量：3600 ppr
首页
上一页
下一页
尾页