Baumer software speeding up encoder engineering

2024-03-27
关注

Compact EB360R multiturn encoder connected via USB-C CAN adapter is transmitting data to the Baumer Sensor Suite.

Baumer encoders for mobile machines are renowned for ultimate durability and precision. Sensor expert Baumer now sets new standards even in encoder engineering by own freeware for easy encoder testing and parameterization. The Baumer Sensor Suite (BSS), with more than 6000 users already well established in in-dustrial applications, now is also applicable for CANopen interface. The BSS is a PC-based software for easy evaluation, selection and parameterization of IO-Link devices - and now also for the Baumer CANopen devices. With this smart solution easing engineering work and saving valuable time, Baumer further extends its user base.

New engineering experience: Finally see what the sensor is seeing

What does the release of the premium tool Baumer Sensor Suite CANopen mean to developing engineers? In short, the BSS brings complex sensor data into an easily understandable structure. The BSS features an intuitive encoder cockpit which allows for a quick grasp of graphically presented measured values. This is a big benefit, particularly when it comes to parameterization. Thanks to BSS, users can see at a glance what the encoder is detecting. The user-friendly software layout does not only provide unprecedented engineering experience but also offers tangible economic benefits: The simple setup and intuitive user interface puts an end to the hassle of comparing measured against parameterization values and hence cuts down on project runtime. Encoders to PC connection is established in an instant and without the need for external power supply using the Baumer USB-C CAN adapter, e.g. for assigning node IDs via the BSS.
The Baumer Sensor Suite is available as free download as of March 2024 and is applicable to many Baumer encoder families and inclination sensors, mainly in the field of mobile machines: EAM580RS, EAM580R, EAM500R, EAM360R, EAM300, EAM280, EB360R, GIM360R and many more.
Further information: www.baumer.com/a/baumer-sensor-suite

您觉得本篇内容如何
评分

相关产品

Honeywell 霍尼韦尔智能工业 在线/便携烟气分析仪专用传感器 气体传感器

CO 传感器;SO2传感器;NO2 传感器;NO传感器;氧气传感器

南方泰科 TGM 压力传感器

TGM是一款SOP8封装的压阻式MEMS压力传感器,其压力传感器芯片封装在 SOP8 塑封壳内。在传感器压力量程内,当用固定电压供电时,传感器产生毫伏输出电压,正比于输入压力。压力传感器芯片为绝压,可提供不同的压力量程的SOP8 压力传感器。

Huba Control 富巴 525系列 压力传感器

525系列压力传感器采用集公司20多年研发经验的陶瓷压力传感器芯片技术。该系列压力传感器可选压力范围大,电气连接形式多。最小量程为50mbar。大批量使用具有很好的性价比。

Cubic 四方光电 PM3009BP 室外粉尘传感器

PM3009BP是一款专门针对餐饮油烟监测的油烟传感器,其采用旁流采样方式,自带除水雾装置,结合智能颗粒物识别算法,确保传感器能够快速准确的检测油烟浓度的变化,同时创新的镜头自清洁技术的应用,能够长效防护传感器油烟污染,大幅度延长传感器的使用寿命。

Winsen 炜盛科技 MH-410D 红外CO2气体传感器 红外传感器

MH-410D红外气体传感器是通用型、智能型、微型传感器,该红外传感器利用非色散红外(NDIR)原理对空气中存在的CO2进行探测,具有很好的选择性,无氧气依赖性,性能稳定、寿命长。内置温度补偿。该红外传感器是通过将成熟的红外吸收气体检测技术与微型机械加工、精良电路设计紧密结合而制作出的小巧型高性能红外传感器。该红外传感器可广泛应用于暖通制冷与室内空气质量监控、工业过程及安全防护监控、农业及畜牧业生产过程监控。

Alliance 莱恩&联众传感线缆 Aurora Tool Cable 医疗电线 医疗线缆

用于连接两个5DOF传感器或一个6DOF传感器的电缆。 可重复使用 用于电磁跟踪系统

RAYCOH 锐科智能 30GM系列 IO-Link输出 2EP-IO,IUEP-IO 超声波测距传感器和接近开关

RAYCOH 锐科智能30GM系列 IO-Link输出 超声波线性位置传感器和开关

鑫精诚传感器 XJC-T001 压力传感器

◆传感器激光焊接密封,环境适应性较强 ◆球形联接件,始终保持模块的垂直称重状态 ◆支撑螺栓,防止设备倾覆且方便维护 ◆接地装置,保护传感器免受电源浪涌冲击 ◆过载保护装置,保护传感器免受冲击力

评论

您需要登录才可以回复|注册

提交评论

提取码
复制提取码
点击跳转至百度网盘